Tech Support for LAN Port Router
Find setup guides, datasheets, and expert support options below.
Downloads & Guides
Access the latest firmware, manuals, and software tools.
Integration Support
Need assistance configuring protocols or connecting to SCADA?
Book Remote SessionTechnical Specifications
| Cellular Network Specifications | Supported Cellular Standards: 4G LTE FDD, 3G DC-HSPA+, HSPA+, UMTS, EDGE, GPRS, GSM | Supported LTE Bands: 2600, 2100, 1800, 900, 800 MHz (700, 1700, 2100 MHz optional) | Maximum LTE Speed: Downlink 100 Mbps, Uplink 50 Mbps | Transmit Power: Less than 23 dBm | Receiver Sensitivity: Less than -97 dBm | ||
|---|---|---|---|---|---|---|---|
| WiFi Specifications | WiFi Standard: IEEE 802.11 b/g/n | Maximum WiFi Speed: Up to 144 Mbps (802.11n) | WiFi Security: WEP, WPA, WPA2 encryption with optional WPS | WiFi Transmit Power: Up to 26 dBm depending on mode | WiFi Sensitivity: Less than -72 dBm at 54 Mbps | ||
| Interfaces & Connectivity | Ethernet WAN Port: 1 x 10/100 Mbps RJ45 with MDI/MDIX and 15KV ESD protection | Ethernet LAN Port: 1 x 10/100 Mbps RJ45 with MDI/MDIX and 15KV ESD protection | Serial Interface: 1 x RS232 or RS422/RS485 with 15KV ESD protection | Serial Baud Rate: 2400 to 115200 bps | SIM Slot: Standard SIM slot supporting 1.8V and 3V SIM cards | ||
| Hardware & System | Processor: Industrial-grade 32-bit CPU | Operating System: Embedded Linux | Memory: 128 MB DDR2 RAM, 16 MB Flash (expandable up to 64 MB) | System Protection: Hardware watchdog, auto recovery, ESD protection | LED Indicators: SIM, Online, LAN, WAN, WiFi, System, Signal Strength, Power | ||
| Power Specifications | Input Voltage: DC 12V nominal | Accepted Voltage Range: DC 5V to 36V | Power Protection: Reverse polarity and over-voltage protection | Power Consumption (Standby): Approximately 134 to 201 mA depending on network mode | Power Consumption (Active): Approximately 174 to 494 mA depending on network mode | ||
| Mechanical & Environmental | Enclosure: Metal casing | Protection Class: IP30 | Dimensions: 157 x 97 x 25 mm (excluding antennas) | Weight: Approximately 440 g | Operating Temperature: -35°C to +75°C | Storage Temperature: -40°C to +85°C | Humidity: Up to 95% non-condensing |
Frequently Asked Questions
Find answers to the most common questions about this product.
LAN Port Router is used to provide stable cellular connectivity for industrial IoT and M2M applications by connecting serial devices, Ethernet networks, and WiFi equipment.
It supports RS232, RS485, RS422 serial devices, Ethernet LAN and WAN equipment, and WiFi-enabled devices.
Yes, it is designed with an industrial-grade CPU, metal enclosure, watchdog system, and wide operating temperature range.
Yes, the built-in watchdog and auto-recovery mechanisms ensure continuous operation and automatic reconnection.
The router can be mounted inside industrial control cabinets or panels using standard mounting brackets.
Yes, it supports WEP, WPA, and WPA2 encryption with optional WPS functionality.
It is widely used in smart factories, industrial automation, transportation systems, utilities, and remote monitoring applications.
Yes, it supports a wide input voltage range from DC 5V to 36V, suitable for industrial power systems.
Still have questions? Contact our support team