Tech Support for 5G Indoor Internet Hotspot v1
Find setup guides, datasheets, and expert support options below.
Downloads & Guides
Access the latest firmware, manuals, and software tools.
Integration Support
Need assistance configuring protocols or connecting to SCADA?
Book Remote SessionTechnical Specifications
| Cellular Connectivity | 5G Technology: 5G NR (SA & NSA) | Supported Networks: 5G NR, FDD-LTE, TDD-LTE, WCDMA | 5G Frequency Bands: Sub-6 GHz bands (regional variants) | LTE Frequency Bands: FDD & TDD LTE bands (regional variants) | MIMO Support: 5G NR 4×4 DL MIMO, 2×2 UL MIMO; LTE 4×4 MIMO | Theoretical Throughput: 5G DL up to 4.67 Gbps, UL up to 1.25 Gbps |
|---|---|---|---|---|---|---|
| Wi-Fi Specifications | Wi-Fi Standard: IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 6) | Wi-Fi Bands: 2.4 GHz + 5 GHz dual-band | Wi-Fi Speed (2.4 GHz): Up to 1.1 Gbps (4×4 MIMO) | Wi-Fi Speed (5 GHz): Up to 2.4 Gbps (4×4 MIMO) | Channel Bandwidth: 20 / 40 / 80 MHz | |
| Hardware & Performance | Processor: Quad-core Cortex-A55 @ 2.0 GHz | RAM: LPDDR4 (up to 2 GB) | Flash Storage: Up to 32 GB | |||
| Interfaces & Ports | Ethernet Ports: 1 × 2.5G LAN/WAN + 1 × 1G LAN (RJ45) | SIM Slot: Nano-SIM | USB Interface: USB Type-C 2.0 | Telephone Port: 1 × RJ11 (Optional) | Indicators: Signal, 5G, 4G, Wi-Fi, Power LEDs | Reset: Factory reset button |
| Power & Electrical | Power Supply: DC 12V / 3A | Input Voltage Range: DC 9V – 24V | Power Protection: Built-in reverse polarity protection | |||
| Mechanical & Environmental | Enclosure Material: ABS industrial-grade housing | Dimensions: 178 × 99 × 99 mm | Weight: Approx. 650 g | Operating Temperature: 0°C to +40°C | Storage Temperature: -40°C to +85°C | Humidity: Up to 95% non-condensing |
Frequently Asked Questions
Find answers to the most common questions about this product.
The 5G Indoor Internet Hotspot-v1 is a high-speed indoor 5G CPE that converts 5G cellular connectivity into dual-band Wi-Fi 6 and wired Ethernet for homes, offices, and commercial environments.
Yes, the 5G Indoor Internet Hotspot-v1 supports both Standalone (SA) and Non-Standalone (NSA) 5G NR modes for maximum carrier compatibility.
Yes, it is ideal for fixed wireless access (FWA) deployments and can replace or supplement wired broadband where fiber is unavailable or costly.
Installation is plug-and-play. Insert a Nano-SIM card, connect the power adapter, and place the device indoors near optimal signal coverage. No professional installation is required.
The device is designed for stable tabletop or shelf placement in indoor environments. Wall-mounting options may be supported using third-party brackets if required.
It is ideal for homes, offices, shopping malls, coworking spaces, airports, train stations, and other indoor locations requiring wide and stable 5G Wi-Fi coverage.
Yes, with Wi-Fi 6, 4×4 MIMO, and dual-band operation, it delivers high throughput and low latency for multiple connected users.
Absolutely. The 5G Indoor Internet Hotspot-v1 enables rapid internet deployment without fiber, making it perfect for temporary sites, events, and remote offices.
Still have questions? Contact our support team